Courses:
Electrical Drives (2012- )
Control of Electrical Drives (2009- )
Computer-Aided Design in Power Engineering (2008- )
Frequency Converters and Servo Controllers (2017-)
Electrical Traction and Vehicles (2017-)
------------------------------------------------------------------------
Multimotor Electrical Drives (2015-2021)
Testing of Electrical Machines (2016-2021)
Power System Protection (2008-2015)
High Voltage Technique (2008-2015)
Electrical Machines 1 (2010-2014)
Electrical Machines 2 (2010-2015)
Power Transformers (2008-2010)
Electrical Machines (2008-2010)
Induction Machines (2008-2010)
Fundamentals of Electrical Engineering (2007)
Basic personal info
Marko Rosić was born in Priboj on July 31st, 1984. He completed elementary school and secondary vocational school in electrical engineering, power engineering module. He receives numerous awards for his achievements in competitions in the field of electrical engineering.
In 2003, he enrolled at Technical Faculty Cacak, majoring in Electrical Engineering, Power Engineering module. During his fifth year of studies, he served as a student demonstrator, conducting exercises in the subject of Fundamentals of Electrical Engineering at the Technical Faculty. He graduated in September 2008 with the highest final grade of 10 (his average grade during studies was 9,34). Throughout his studies, he was recognized as the most successful student and the most successful graduate student in Electrical Engineering at the Technical Faculty.
Following graduation, in October 2008, he began working at the Technical Faculty Cacak as a Teaching Associate. In November 2009, he was appointed to the position of Teaching Assistant at the Technical Faculty Cacak (now the Faculty of Technical Sciences Čačak). In 2016, he attained the position of Assistant Professor, and in 2021, he was promoted to the position of Associate Professor at the Faculty of Technical Sciences Čačak, within the Department of Power Engineering, where he still works.
In 2016, he successfully defended his doctoral dissertation titled "Ripple reduction in Direct Torque Control of induction motors by using multilevel comparators" at the University of Belgrade, School of Electrical Engineering, Power Converters and Driveс module.
Trainings - courses
- EPLAN Electric P8 - Basic, EXOR ETI d.o.o, 9.10-11.10.18 год., Belgrade, SERBIA
- EPLAN Electric P8 - Advanced, EPLAN Software&Service GmbH, 21.12-22.12.21 год., Belgrade, SERBIA
List of scientific publications
International journals
- Bjekić, D., Bjekić, M., Božić, M., Rosić, M. & Krneta, R., “Energy Efficient Behaviour and Electricity Consumption in Industrial Companies”, Metalurgia International, XVII(7), pp.130-139, ISSN 1582-2214, 2012 [M23]
- Bjekić, M., Stojanović, D., Rosić, M., Božić, M., "Analysis of Mitigation Techniques for Bearing Currents in PWM Inverter Drives", Metalurgia International, No. XVIII(2), 2012, pp. 91-98, ISSN: 1582-2214, 2012 [M23]
- Koprivica, B., Bozić, M., Rosić, M., Bjekić, M., “Application of Standard and Modified Eh-Star Test Method for Induction Motor Stray Load Losses and Efficiency Measurement”, Serbian Journal of Electrical Engineering, Vol. 9, No. 3, October 2012, pp.277-391, ISSN 1451-4869, DOI: 10.2298/SJEE1203377K, 2012 [M24]
- Rosić, M., Jeftenić, B., Bebić, M., “Reduction of Torque Ripple in DTC Induction Motor Drive with Discrete Voltage Vectors”, Serbian Journal of Electrical Engineering, Vol. 11, No. 1, February 2014, pp.159-173, ISSN 1451-4869 DOI: 10.2298/SJEE131204014R, 2014 [M24]
- M. M. Rosic, M. Z. Bebic, “Analysis of Torque Ripple Reduction in Induction Motor DTC Drive with Multiple Voltage Vectors”, Advances in Electrical and Computer Engineering, vol. 15, no. 1, pp. 105-114, 2015, ISSN: 1582-7445, e-ISSN: 1844-760, DOI:10.4316/AECE.2015.01015, 2015 [M23]
- M. Bjekić, M. Šućurović, M. Božić, M. Rosić, and S. Antić, “Using a computer for measurement and visualization of rotating magnetic field in AC machines”, Comput. Appl. Eng. Educ., Volume 25, Issue 4, no. 21825, pp. 608–624, ISSN: 1061-3773, DOI:10.1002/cae.21825, Apr. 2017 [M22]
- M. Rosić, S. Antić, M. Bebić, “Improvements of torque ripple reduction in DTC IM drive with arbitrary number of voltage intensities and automatic algorithm modification”, Turkish Journal of Electrical Engineering & Computer Sciences, Vol. 29, No.2, pp. 687-703, DOI: 10.3906/elk-2003-10, ISSN: 1300-0632, Available online: 29.07.2020. [M23]
- Ćalasan, M.; Alqarni, M.; Rosić, M.; Koljčević, N.; Alamri, B.; Abdel Aleem, S.H.E. "A Novel Exact Analytical Solution Based on Kloss Equation towards Accurate Speed-Time Characteristics Modeling of Induction Machines during No-Load Direct Startups", Applied Sciences, 2021, 11, 5102. https://doi.org/10.3390/app11115102 [M22]
-
Rosić, M., Koprivica, B., Bjekić, M., "Smart DTC Algorithm with Automatic Torque Ripple Adjustment", Journal of Electrical Engineering, Vol.73, No.2, pp.88-98, 2022, https://doi.org/10.2478/jee-2022-0012 [M23]
-
Divac, S., Rosić, M., Zurek, S., Kopricica, B., Chwastek, K., Vesković,. M., "A Methodlology for Calculation the R-L Parameters of a Nonlinear Hysteretic Inductor Model in the Time Domain", Energies 2023, 16, 5167, https://doi.org/10.3390/en16135167 [M23]
- Chwastek, K.; Najgebauer, M.; Jabłoński, P.; Szczegielniak, T.; Kusiak, D.; Koprivica, B.; Rosić, M.; Divac, S. "Modeling Dynamic Hysteresis Curves in Amorphous Magnetic Ribbons", Applied Sciences, 2023, 13, 9134. https://doi.org/10.3390/app13169134 [M22]
-
Antic, S., Rosic, M., Djurovic, Z. et al. Comparison of structured residuals design techniques for actuator and sensor fault detection and isolation in a permanent magnet DC motor. Electrical Engineering (2023). https://doi.org/10.1007/s00202-023-02021-z [M23]
-
Bjekić, M., Rosić, M., Šućurović, M. GeoGebra Tool: Development of Applications for Electrical Machines and Drives Teaching Support. International Journal of Engineering Education, Vol. 40, No.1, pp.23-37, 2024, ISSN:0949-149X, https://www.ijee.ie/contents/c400124.html [M23]
-
Rosić, M., Bjekić, M., Bjekić, D. The Efficacy of GeoGebra Tool in Enhancing Electrical Machines and Drives Instructions. International Journal of Engineering Education, Vol.40, No.1, pp.38-43, 2024, ISSN:0949-149X, https://www.ijee.ie/contents/c400124.html [M23]
-
Chwastek K., Najgebauer M., Kopricica B., Divac S., Rosić M., Two Approaches to Model Power Loss Under Increased Excitatioin Frequency. Acta Phisica Polonica A, No.1 Vol.146, pp.9-147, 2024, ISSN: 0587-4246, doi: https://doi.org/10.12693/APhysPolA.146.15 [M23]
-
International conferences
- Bjekic, D., Bjekic, M., Bozic. M., Rosic, M., “The public relation management in the promotion of electric drive energy efficiency policy”, Proceedings of 3rd regional conference Industrial Energy and Environmental Protection in southeastern European countries - IEEP 2011, CD proceedings, pp. 1-8, ISBN: 978-86-7877-022-7, Kopaonik, Serbia, 21-25 June, 2011 [M33]
- Rosic, M., Bozic, M., Bjekic, M., Antic, S., “Energy efficiency of electric pump drive”, Proceedings of the International scientific conference - UNITECH ’12, Gabrovo, Bulgaria, Vol. I, pp. 51-58, ISSN: 1313-230X, 16-17. Nov. 2012 [M33]
- Antic, S., Bjekic,M., Bozic, M., Rosic, M., “Motor Rewinding and Effect on Efficiency”, Proceedings of the International scientific conference - UNITECH ’12, Gabrovo, Bulgaria, Vol. I, pp. 43-50, ISSN: 1313-230X, 16-17. Nov. 2012 [M33]
- Božić, M., Rosić, M., Koprivica, B., Bjekić, M., Antić, S., “Efficiency classes of three-phase, cage-induction motors (IE-code) software”, Proceedings of IX International Symposium Industrial Electronics - INDEL2012, pp. 87-91, ISBN: 978-99955-46-14-4, Banja Luka, Bosna i Hercegovina, November 1-3, 2012 [M33]
- Bjekic, M., Bozic, M., Rosic, M., Popovic, M., Petković, D., “Design, Construction, Calibration and Use of A New Type of Electromagnetic Brake”, Proceedings of XLVIII International Scientific Conference on Information, Communication and Energy Systems and Technologies - ICEST 2013, Vol. 2, pp. 727-730, Ohrid, ISBN:978-9989-786-89-1, Macedonia, 26-29 June, 2013 [M33]
- Božić, M., Mitrović, N., Rosić, M., “Realization of flying shear for laboratory experiments”, Proceedings of XLVIII International Scientific Conference on Information, Communication and Energy Systems and Technologies - ICEST 2013, Vol. 2, pp. 847-850, Ohrid, ISBN:978-9989-786-89-1, Macedonia, 26-29 June, 2013 [M33]
- Božić, M., Rosić, M., Bjekić M., “Remote control of electromagnetic load emulator for electric motors”, Proceedings of 11th International Conference on Remote Engineering and Virtual Instrumentation - REV2014, Polytechnic of Porto (ISEP) in Porto, pp. 389-390, DOI: 10.1109/REV.2014.6784196, ISBN: 978-1-4799-2024-2, Portugal from 26-28 February, 2014 [M33]
- Rosić, M., Božić, M., Bjekić M., “Station for Emulation of Load and Electrical Motors Testing”, Proceedings of XLIX International Scientific Conference on Information, Communication and Energy Systems and Technologies - ICEST 2014, Vol. 2 pp. 395-398, ISBN: 978-86-6125-109-2, Niš, Serbia, 25-27 June, 2014 [M33]
- Bozic, M., Rosic, M., Bjekic, M., Đorđević, G., “Platform for teaching feed-forward and jerk control”, Proceedings of the International scientific conference - UNITECH ’14, Vol. IV, pp. 286-291, ISBN: 1313-230X, Gabrovo, Bulgaria, 21-22. Nov. 2014 [M33]
- Rosic, M., Bozic, M., Bjekic, M., Ristic, L., “Electrical Motor Testing Station with Electromagnetic Load Emulator: An Overview of Design, Construction and Calibration with Examples of Use”, Proceedings of 3rd International Symposium on Environment – Friendly Energies and Applications - EFEA2014, pp. 371-376, DOI: 10.1109/EFEA.2014.7059959, ISBN: 978-1-4799-7518-1, Paris, France, 19-21 Nov. 2014, [M31]
- Bjekic, M., Bozic, M., Rosic, M., Sucurovic, M., “Remote experiments: Step motor control and magnetic field visualization of induction machine”, Proceedings of 3rd Experiment@International conference - exp.at'15, pp. 153-154, DOI:10.1109/EXPAT.2015.7463250, Electronic ISBN: 978-1-4673-7717-1, USB ISBN: 978-1-4673-7716-4, 2-4 June 2015, University of the Azores, Ponta Delgada, Azores, Portugal, 2015 [M33]
- Rosic, M., Bebic, M., Djordjevic, N., Jeftenic, B., Bjekic, M., “Torque Ripple Reduction in DTC with Discretized Voltage Intensities”, Proceedings of 18th International Symposium POWER ELECTRONICS - Ee2015, Paper No. DS1-T2-1, pp. 1-6, ISBN:978-86-7892-757-7, Novi Sad, Republic of Serbia, 28th - 30th October, 2015 [M33]
- Sucurovic, M., Mitrovic, N., Bjekic, M., Bozic, M., Rosic, M., “Calibration of the electromagnetic brake”, Proceedings of the International scientific conference - UNITECH ’15, Vol. I, pp. 159-162, ISSN 1313-230X, Gabrovo, Bulgaria, 20-21. Nov. 2015 [M33]
- Rosić, M., Bebić, M, Djordjevic, N., Bjekić, M., Šućurović, M, “Simulation model of direct torque control with discretized voltage vector intensities”, Proceedings of 6th International Conference Technics and Informatics in Education - TIO2016, Faculty of Technical Sciences, Čačak, Serbia, Proceedings TIO 2016, pp. 429–438, UDC: 621.313.33:004.42, ISBN 978-86-7776-192-9, 28−29th May, 2016 [M33]
- Bjekić, M., Božić, M., Rosić, M., Antić, S., “Remote experiment: Serial and parallel RLC circuit”, Proceedings of 3rd International Conference on Electrical, Electronic and Computing Engineering - IcETRAN2016, Zlatibor, Serbia, pp.AUI1.2.1-6, ISBN: 978-886-7466-618-0, 13–16 June, 2016 [M33]
- Rosic, M., Bjekic, M., Bebic, M., Jeftenic, B., “Electromotive force compensation in direct torque control with discretized voltage intensities”, Proceedings of 4th International Symposium on Environment Friendly Energies and Applications - EFEA 2016, pp. 1-6, ISBN: 979-1-5090-0750-9, DOI:10.1109/EFEA.2016.7748810, Belgrade, Serbia, 14-16 September, 2016 [M33]
- Rosić, M., Antić, S., Bjekić, M., Vujičić, V., "Educational laboratory setup of DC motor cascade control based on dSPACE1104 platform", Proceedings of 5th International Conference on Renewable Electrical Power Sources - ICREPS2017, v.5 n.1, pp. 213-222, ISBN:978-86-81505-84-7, DOI:10.24094/mkoiee.017.5.1.213, Belgrade, Serbia, 12-13 October, 2017 [M33]
- Šućurović, M., Petronijević, M., Mitrović, N., Rosić, M., "Effects of voltage unbalance on torque oscillations in induction motor", Proceedings of the International scientific conference - UNITECH ’17, Vol. I, pp. 106-111, ISSN: 1313-230X, Gabrovo, Bulgaria, 17-18. Nov. 2017. [M33]
- Rosić, M., Bjekić, M., Šućurović, M, “Application of induction machine U/f control through the educational laboratory setup”, Proceedings of 7th International Conference Technics and Informatics in Education - TIE2018, Faculty of Technical Sciences, Čačak, Serbia, UDC: 621.313/.341:004.42MATLAB, ISBN 978-86-7776-226-1, pp. 351-357, 25−27th May, 2018 [M33]
- Šućurović, M., Vujičić, V., Božić, M., Rosić, M., Koprivica, B., “Testing of magnetomechanical torque sensor using electromagnetic load emulator - temperature correction”, Proceedings of 5th International Conference on Electrical, Electronic and Computing Engineering - IcETRAN 2018, ISBN: 978-86-7466-752-1, pp. 750-755, www.etran.rs, 11-14 June, 2018 [M33]
- Šućurović, M., Božić, M., Vujičić, V., Marjanović, M., Dragićević, S., Rosić, M., “Experimental testing of thermal and electrical performance of a hybrid photovoltaic-thermal solar collector”, Proceedings of VIII International conference - Industrial Engineering and Environmental Protection - IIZS 2018, ISBN: 978-86-7672-309-6, pp.197-203, Zrenjanin, Serbia, 11-12 October, 2018 [M33]
- Rosić, M., Luković, M., Bjekić, M., Koprivica, B., “Slip compensation of U/f controlled induction machine through educational laboratory setup”, Proceedings of the International scientific conference - UNITECH 2018, Vol. I, pp. 16-23, ISSN: 1313-230X, Gabrovo, Bulgaria, 16-17. Nov. 2018 [M33]
- Koprivica, B., Sućurović, M., Vujiučić, V., Božić, M., Rosić, M., “Calibration of torque sensor prototype using commercial torque sensor”, Proceedings of the International scientific conference - UNITECH 2018, Vol. I, pp. 53-57, ISSN: 1313-230X, Gabrovo, Bulgaria, 16-17. Nov. 2018 [M33]
- Božić, M., Šućurović, M., Rosić, M., Vujičić, V., Bjekić, M., “Laboratory setup for measurements basic pump system characteristic”, Proceedings of the International scientific conference - UNITECH 2018, Vol. III, pp. 154-158, ISSN: 1313-230X, Gabrovo, Bulgaria, 16-17. Nov. 2018 [M33]
- Vujičić, V., Šućurović, M., Bjekić, M., Rosić, M., Bjekić, M. ”Experimental Determination of the Stepper Motor controlled Butterfly Valve Characteristics”, Proceedings of the International scientific conference - UNITECH 2019, Vol. I, pp. 35-39, ISSN: 1313-230X, Gabrovo, Bulgaria, 15-16. Nov. 2019 [M33]
- Šućurović, M., Vujičić, V., Bjekić, M., Rosić, M., Bjekić, M. “Power and Efficiency Determination of Pat System Using Laboratory Setup”, Proceedings of the International scientific conference - UNITECH 2019, Vol. III, pp. 193-198, ISSN: 1313-230X, Gabrovo, Bulgaria, 15-16. Nov. 2019 [M33]
- Rosić, M., Bjekić, M., Šućurović, M., Vujičić, V., “Experimental Comparison of Several Flux Estimation Techniques in Induction Machines”, Proceedings of the International scientific conference - UNITECH 2019, Vol. I, pp. 66-73, ISSN: 1313-230X, Gabrovo, Bulgaria, 15-16. Nov. 2019 [M33]
- Radusin, A., Rosić, M., Koprivica B., “Induction Machine Control Algorithm Implementation with MSK29335 Digital Platform”, Proceedings of 8th International Scientific Conference Technics and Informatics in Education - TIE2020, Faculty of Technical Sciences, Čačak, Serbia, UDC: 621.313/.314:004.42MATLAB, ISBN: 978-86-7776-247-6, pp. 304-310, 18-20th September, 2020 [M33]
- Ojdanić, V., Rosić, M., Bjekić, M., “Laboratory DC Machine Test Bench with Siemens DCM Drive”, Proceedings of 8th International Scientific Conference Technics and Informatics in Education - TIE2020, Faculty of Technical Sciences, Čačak, Serbia, UDC: 621.313/.314:004.42, ISBN: 978-86-7776-247-6, pp. 311-316, 18-20th September, 2020 [M33]
- Bjekić, M., Vujičić, V., Šućurović, M., Rosić, M., Bjekić, M., “Educational Laboratory Pump System Setup - pQ Open-Loop Control”, Proceedings of 7th International Conference on Electrical, Electronic and Computing Engineering - IcETRAN 2020, ISBN: 978-86-7466-852-8, pp. 281-286, 28-29. September 2020 [M33]
- Šućurović, M., Marjanović, M., Rosić, M., Bjekić, M., Koprivica, B., “Temperature measurement and current determination of horizontally and vertically placed low-voltage single core cable”, Proceedings of the International scientific conference - UNITECH 2020, Vol. I, pp. 112-117, ISSN: 1313-230X, Gabrovo, Bulgaria, 20-21. Nov. 2020 [M33]
- Vujičić, V., Bjekić, M., Šućurović, M., Rosić, M., “Educational Aspects of Variable Frequency Controlled Pump System”, Proceedings of the International scientific conference - UNITECH 2020, Vol. II, pp. 206-2013, ISSN: 1313-230X, Gabrovo, Bulgaria, 20-21. Nov. 2020 [M33]
-
Bjekić M., Rosić M., Šućurović M., Vujičić V., "Energy Efficiency Contents in Laboratory Settings in the Field of Electrical Machines and Electric Drives at the Faculty of Technical Sciencess Čačak", 9th International Conference on Renewable Electrical Power Sources, Belgrade, 15. Oct. 2021 [M33]
-
Andrzejewski A., Rosić M., "Protection againts electric shock in electrical engineering didactic laboratories", Proceedings of 9th International scientific conference Technics and Informatics in Education - TIE2022, pp. 109-115, DOI: 10.46793/TIE22.109A, Faculty of Technical Sciences Čačak, Serbia, 16-18. September 2022 [M33]
-
Blagojević V., Rosić M., "Field reversal DC machine braking with DCM drive", Proceedings of 9th International scientific conference Technics and Informatics in Education - TIE2022, pp.129-136, DOI: 10.46793/TIE22.129B, Faculty of Technical Sciences, Čačak, Serbia, 16-18. September 2022 [M33]
-
Rosić M., Pesović U., "Graphical representation of basic electrical power quantities measured with power logic pm5000 series", Proceedings of International Scientific Conference UNITECH '22, Vol. I, pp. 98-102, Gabrovo, Bulgaria, 18-19. November 2022 [M33]
-
Rosić M., Bjekić M., Bogdanović M., Ljeljen I., "Adaptation of AC load bank system for programable resistive loading and testing of diesel generators", Proceedings of 22n International Symposium INFOTEH-JAHORINA, pp. 203-207, 15-17 March 2023 [M33]
- Bjekić M., Rosić M., "Graphical interpretation of characteristics of magnetic circuits, induction machines, and standardized types of electrical drives using GeoGebra software support", Proceedings COAST 2023 - 2nd International Conference on Advances in Science and Technology, ISBN 978-9940-611-06-4, pp. 215-225, Herceg Novi, Montenegro, 31. May - 3. June 2023 [M33]
-
Antić S., Luković V., Rosić M., Pešović U., "FPGA Digital circuit for actuator and sensor FDI of DC motor with an amplifier", Proceedings of 10th International Conference on Electrical, Electronic and Computing Engineering - IcETRAN 2023, pp. EEI1.4 1-5, doi: 10.1109/IcETRAN59631.2023.10192108, East Sarajevo, Republic of Srpska, BiH5.-8. June 2023 [M33]
- K. Chwastek, M. Najgebauer, B. Koprivica, M. Rosić, S. Divac: A Comparison of Two Approaches to Model Power Losses under Increased Excitation Frequency, 14th Symposium of Magnetic Measurements & Modelling, 16-18 Oct. 2023, Zakopane, Poland, pp. 29. [M34]
- M. Najgebauer, K. Chwastek, P. Jabłoński, B. Koprivica, M. Rosić, S. Divac: Scaling-based Analysis of Magnetic Losses under Non-sinusoidal Excitations, 14th Symposium of Magnetic Measurements & Modelling, 16-18 Oct. 2023, Zakopane, Poland, pp. 31-32. [M34]
- B. Koprivica, K. Chwastek, M. Rosić, M. Najgebauer, S. Divac: Influence of Shunt Resistor Value on Control Quality During Magnetic Hysteresis Measurement, 14th Symposium of Magnetic Measurements & Modelling, 16-18 Oct. 2023, Zakopane, Poland, pp. 35-36. [M34]
- P. Jabłoński, K. Chwastek, M. Najgebauer, D. Kusiak, T. Szczegielniak, B. Koprivica, M. Rosić, S. Divac: Modeling of the effect of eddy currents on the shape of hysteresis loop in permalloy, 14th Symposium of Magnetic Measurements & Modelling, 16-18 Oct. 2023, Zakopane, Poland, pp. 57-58. [M34]
- M. Rosić, B. Koprivica, M. Bjekić, "Shape of the Magnetic Field Under a Pole of Induction Machine with Conventional and Sinusoidal Winding Configuration", 3rd International Conference on Advances in Scinece and Technology - COAST 2024, 29. May - 1. June 2024, Herceg Novi, Montenegro [M33]
- M. Bjekić, M. Rosić, D. Miljojković, "Visualisation of Magnetic Fields in Alternating Current Machines Using the GeoGebra program", 11th International Conference on Electrical, Electronics and Computer Engineering - IcETRAN 2024, 3-6 June 2024, Niš, Serbia [M33]
Monography
- Bjekić, M., Stojanović, D., Milovanović, A., Koprivica, B., Rosić, M., Božić, M., Plazinić, M. Antić, S., Bjekić, D., Krneta, R., Jeftenić, B., Štatkić, S., Bebić, M., Ristić. L., „Energetska efikasnost elektromotornih pogona”, Technical faculty Cacak, 2012, ISBN: 978-86-7776-137-0 [M45]
National journals
- Stojković, S., Rosić, M., „Analysis of the Interconnection of Embedded Generation to the Distribution Grid by BY ATP-EMTP Software Tool”(in Serbian), Energija, ekonomija, ekologija - eee2009, No.3-4/Year XI/March 2009., UDC 620.9, ISSN br. 0354-8651, pp. 94-100 [M52]
- Bjekić, D., Bjekić, M., Rosić, M., Bozić, M., „Evaluation of innovation in the university teaching technical education: The example of teaching electrical machines and drives”(in Serbian), Pedagogoja, 66 (4), 2011, UDK: 378.147::62; 378.6:62(497.11), ISSN 0031-3807, 2011 pp. 620-632 [M51]
- Bozić, M., Rosić, M., Bjekić, M., Antić, S., „Obstacles in introduction of energy efficient motors and their overcoming”(in Serbian), Innovation and development, Bor 2011, No. 2, pp. 31-46, UDK: 621.313.13(045)=861, ISSN: 0353-2631, 2011 [M53]
- Vujičić V., Dragićević S., Marjanović M., Šućurović M., Božić M., Rosić M., „ A Laboratory System Development for Measuring Characteristics of Photovoltaic-thermal Panel”, IMK-14 – Research & Development in Heavy Machinery, Vol. 24(2018)4, EN105-108, UDC 621, ISSN 0354-6829, December 2018 [M52]
- B. Koprivica, M. Rosić, K. Chwastek, "Time Domain Analysis of Excess Loss in Electrical Steel", Serbian Journal of Electrical Engineering, Vol. 16, No. 3, October 2019, pp. 439-454, ISSN: 1451-4869 , eISSN: 2217-7183, DOI: https://doi.org/10.2298/SJEE1903439K, 2019 [M51]
- M. Rosić, M. Bjekić, "Load Bank System Modification for Appropriate Diesel Generator Testing by Programmable Resistive Load", IJEEC International Journal of Electrical and Computer Engineering, Vol. 7, No.1 2023: IJEEC, DOI: 10.7251/IJEEC2301001R, 2023 [M54]
- K. Chwastek, B. Koprivica, M. Rosić, R. Gozdur, P. Gębara: Modelling Hysteresis Loops of Non-oriented Electrical Steel, Przegląd Elektrotechniczny, Vol. 99, No. 11, Nov. 2023, pp. 221-223, DOI: 10.15199/48.2023.11.40 [M53]
National conferences
- S. Stојkоvić, М. Rоsić, „Infоrmаciоni sistеm zа stаtistiku kvаrоvа i аnаlizu pоuzdаnоsti visоkоnаpоnskih rаstаvlјаčа”, 29. Sаvеtоvаnjе CIGRE Srbijа, Zlаtibоr, R А3-09, pp. 1-8, ISBN: 978-86-82317-67-8, 31. Mаy – 6. June, 2009 [M63]
- Rоsić, М. i Bјеkić, М., „Curriculum materials in the fields of electric machinery and electric drive at faculties in Serbia and neighboring countries”(in Serbian), Proceedings of 3. International Conference, Technics and Informatics in Education - ТIО2010 Technical faculty Cacak, pp. 336-347, ISBN: 978-86-7776-105-9, UDK: 37:(627+621.313/.314)](075.8)(497.11), 7-9. Маy, 2010 [M63]
- Rоsić, М. i Bјеkić, М., „Technical solution use of contactor equipment for the execution of laboratory exercises in electric motor drives”(in Serbian), Proceedings of 3. International Conference, Technics and Informatics in Education - ТIО2010, Technical faculty Cacak, pp. 348-353, ISBN:978-86-7776-105-9, UDK: 371.3:62-3](075.8)(076.5), 7-9. Маy, 2010 [M63]
- Rosić, M., Božić, M., Bjekić, M., „Eight-phase Scott-t transformer: construction, visualization and application”(in Serbian), Proceedings of 6. International Conference Technology, Informatics and Education - ТIО6, Technical faculty Cacak, pp. 647-654, ISBN: 978-86-7776-127-1, UDK: 621.313/.314:004.42 LabVIEW, 3-5. June, 2011 [M63]
- Božić, M., Rosić, M., Bjekić, M., „Visualization procedure of synchronous generator synchronization to the network”(in Serbian), Proceedings of 6. International Conference Technology, Informatics and Education - ТIО6, Technical faculty Cacak, pp. 655-662, ISBN: 978-86-7776-127-1, UDK: 621.313/.314:004.42LabVIEW, 3-5. June 2011 [M63]
- Bjekić, M., Božić, M., Rosić, M., Bјеkić, D., „Evaluation of the laboratory and web site application in electric machines and drives courses”(in Serbian), Proceedings 55. ETRAN Conference - ETRAN2011, pp. EE1.8-1-4, ISBN: 978-86-80509-66-2, Banja Vrućica, 6-9. Јune, 2011 [M63]
- Božić, M., Bjekić, M., Rosić, M., „Acquisition of electrical parameters and formation phasor diagrams using Labview”(in Serbian), Proceedings of 55. ETRAN Conference - ETRAN2011, pp. EE1.7-1-4, ISBN: 978-86-80509-66-2, Banja Vrućica, 6-9. Јune, 2011 [M63]
- Rosić, M., Božić, M., Ašanin, Nј., „Realization of educational laboratory frequency converter with microcontroller PIC18F4431”(in Serbian), Proceedings of 55. ETRAN Conference - ETRAN2011, pp. EE1.6-1-4, ISBN: 978-86-80509-66-2, Banja Vrućica, 6-9. Јune, 2011 [M63]
- Rosić, М., Bjekić, M, Bоžić, М. „Pulse width modulation methods through implementation on DSP TMS320F2812”(in Serbian), Proceedings of 4. International Conference, Technics and Informatics in Education - ТIО2012, Technical faculty Cacak, pp. 200-207, ISBN: 978-86-7776-138-7, UDK:004;;621.313/314, 1-3. Јune, 2012 [M63]
- Rosić, M., Bjekić, M., Božić, M., „Modeling of Direct Torque Control with discrete voltage vectors in Simulink”(in Serbian), Proceedings of 56. ETRAN Conference - ETRAN 2012, pp. EE 2.3-1-4, Zlatibor, 11-14. June, 2012 [M63]
- Šućurović, M., Božić, M., Bjekić, M., Rosić, M., „Measuring and visualization of rotating magnetic field in three-phase induction motor”(in Serbian), Proceedings of 56. ETRAN Conference - ETRAN 2012, pp. EE 2.4-1-4, Zlatibor, 11-14. June, 2012 [M63]
- Rоsić, М., Јеftеnić, B., Bеbić, М., „Analysis of the possibilities of reducing torque ripple in DTC with discrete voltage vectors”(in Serbian), Proceedings of 57. ETRAN Conference - ЕТRАN 2013, pp. EE2.1.1-6, ISBN: 978-86-80509-68-6, Zlаtibоr, 3-6. June, 2013 [M63] – rewarded paper „Young researcher best paper“
- Stојаnоvić, D., Rоsić, М., „When drive with frequency converter may not save energy?”(in Serbian), Proceedings of 57. ETRAN Conference - ЕТRАN 2013, pp. EE1.7.1-6, ISBN: 978-86-80509-68-6, Zlаtibоr, 3-6. June, 2013 [M63]
- Bоžić, М., Rоsić, М., „Platform development for testing control algorithms for AC motors”(in Serbian), Proceedings of 57. ETRAN Conference - ЕТRАN 2013, pp. EE1.3.1-6, ISBN: 978-86-80509-68-6, Zlаtibоr, 3-6. June, 2013 [M63]
- Lazić, A., Rоsić, М., Božić, M., „Graphical user interface for comparison of Direct Torque Control characteristics of induction motor with discrete and continuous voltage vectors”(in Serbian), Proceedings of 5. International Conference, Technics and Informatics in Education - TIO2014, pp. 174-181, ISBN: 978-86-7776-165-3, Čačak, 30-31. May, 2014 [M63]
- Božić M., Bjekić M., Rosić, M., „Concept of pocket laboratory example of DC motor control”(in Serbian), Proceedings of 5. International Conference, Technics and Informatics in Education - TIO2014, pp. 162-167, ISBN: 978-86-7776-165-3, Čačak, 30-31. May, 2014 [M63]
- Rosić, M., Božić M., Bjekić M., Аntić, S., „Educational remote control experiment of servo controller”(in Serbian), Proceedings of 59. ETRAN Conference – ЕТRАN 2015, pp. AU2.2.1-5, ISBN: 978-86-80509-72-3, Srеbrnо јеzеrо, 8-11. June, 2015 [M63]
- Аntić S., Božić M., Bjekić M., Rоsić М., „Remote laboratory exercise to demonstrate the current and the voltage control of a DC motor”(in Serbian), Proceedings of 59. ETRAN Conference - ЕТRАN 2015, pp. AU2.3.1-6, ISBN: 978-86-80509-72-3, Srеbrnо јеzеrо, 8-11. June, 2015 [M63]
- Bjekić, M., Božić, M., Rosić, M., „Using of remote experiment in teaching module "Connecting resistors"(in Serbian), Zbornik radova, XXII skup Trendovi razvoja: „Nove tehnologije u nastavi”, W1.1-5, pp. 99-102, Zlatibor, 16.-19. Feb. 2016 [M63]
- Bjekić, M., Šućurović, M., Štatkić, S., Rosić, M., Božić, M., „Results overview on the project - Research development and implementation of programs and measures for energy efficiency of electric drives”(in Serbian), Proceedings (el. ver.), VI Regional Conference: Industrial energy and environmental protection in South-Eastern Europe-IEEP 2017", Paper no. 032. ISBN: 978-86-7877-028-9, Srbija, Zlatibor, 21-24. June, 2017 [M63]
- Vujicic V.., Sucurovic, M., Bozic, M., Rosic, M., Bjekic, M., „Educational laboratory setup of the pump system with pressure and flow regulation”(in Serbian), Proceedings of 63. ETRAN2019 conference, pp. 321-325, ISBN 978-86-7466-785-9, Silver Lake, Serbia, 3-6 June, 2019 [M63]
- Bjekić M., Vujičić V., Rosić M., Šućurović M., “Separately excited DC machine parameters identification after the machine repair”, (in Serbian), Proceedings of 65. ETRAN2021 conference - ETRAN2021, Ethno Wilage Stanisici, 8-10 September, 2021.
- Rosić M., "Inteligent DTC algorithm with automatic reorganisation based on the torque ripple intensity" (in Serbian), Proceedings of 66. ETRAN2021 conference - ЕТРАН2022, pp. 234-240, ISBN 978-86-7466-930-3, Novi Pazar, Serbia, 6-9. June 2022 [M63]
Doctoral dissertation (M70)
- Rosić, Marko M., 1984- (2016), "Ripple reduction in Direct Torque Control of induction motor by using multilevel comparators", Doctoral dissertation, University of Belgrade, School of Еlectrical Еngineering, 2016 [M71]
http://eteze.bg.ac.rs/application/showtheses?thesesId=3409
Technical and development solutions
- Božić, M., Rosić, M., Bjekić, M., Koprivica, B., „Softver za određivanje stepena iskorišćenja i klase energetske efikasnosti trofaznih asinhronih motora snaga do 7,5 kW“, Tehničko rešenje (softver), Tehnički fakultet Čačak, 2012, dоstupnо u spisku tеhničkih rеšеnjа Мinistаrstvа prоsvеtе, nаukе i tеhnоlоškоg rаzvоја, rеdni brој 830,
http://www.ftn.kg.ac.rs/docs/resenja/Softver_za_odredjivanje_stepena_iskoriscenja_AM.pdf [M85]
- Јugоvić, Z., Јаkоvlјеvić, Ž., Bјеkić, М., Bоžić, М., Rоsić, М., „Čеtvоrооsnа numеrički uprаvlјаnа mаšinа zа nаvаrivаnjе“, Теhničkо rеšеnjе, Fakultet tehničkih nauka, Čаčаk, Маšinski fаkultеt Bеоgrаd, 2014,
http://www.ftn.kg.ac.rs/docs/resenja/Masina_za_navarivanje.pdf [M82]
- Bјеkić, М., Bоžić, М., Rоsić, М., Šućurоvić, М., „Еlеktrоmаgnеtnа kоčnicа sа јеdnim оbrtnim diskоm zа lаbоrаtоriјskа ispitivаnjа еlеktričnih mоtоrа“, Теhničkо rеšеnjе, Fаkultеt tеhničkih nаukа Čаčаk, 2015, dоstupnо u spisku tеhničkih rеšеnjа Мinistаrstvа prоsvеtе, nаukе i tеhnоlоškоg rаzvоја, rеdni brој 2009,
http://www.ftn.kg.ac.rs/docs/resenja/EM_kocnica.pdf [M83]
Books, practicums and workbooks
- Bјеkić М. and Rоsić М., „Contactor equipment in Induction motor drive systems – laboratory practicum with CD” (in Serbian), ISBN 978-86-7776-071-7, Technical faculty Čačak, year 2008.
- Dоbričić, М., Bјеkić, М. and Rоsić, М., „Power Transformers – workbook“(in Serbian), ISBN 978-86-86139-56-6, Technical College Čаčаk, year 2011.
- Bјеkić М., Rosić, M., Dоbričić, М., "Electrical machines workbook (Electromechanical energy conversion, DC machines, Induction machines)"(in Serbian), ISBN 978-86-7776-206-3, Faculty of Technical Sciences in Cacak, year 2017.
- M. Rosić, "EPLAN Electric P8 - basic level" (in Serbian), ISBN 978-86-7776-250-6, Faculty of Technical Sciences in Cacak, 2020.
Catalogues of remote laboratory experiments (one of the authors of the developed laboratory experiments)
- Catalogue of remote laboratory experiments with tutorials (in Serbian), Faculty of Technical Sciences Cacak, editors Krneta R., Miroslav B., ISBN 978-86-7776-180-6, 2016
- Catalogue of laboratory teaching modules with remote experiments, Faculty of Technical Sciences Cacak, editors Krneta R., Miroslav B., ISBN 978-86-7776-189-9, 2016